[500]SSO error:null ,check the vsphere web client server logs for details
i recently upgraded v Center appliance from v sphere 6 .x to vCenter 6.7 . i am facing below issue while login from web client : A server error occurred. [500] SSO error: nullCheck the vSphere Web...
View ArticleRe: Configure Network Setting for Multiple VMs Created from a Template
This would really be *so* much easier with vCenter. Why, again, is there no vCenter in use here?
View ArticleRe: ESXi 6.0U3 disk performance extremely slow
Are you using the latest vmw_ahci driver version?You can check by using the command:esxcli system module get -m vmw_ahci Can you also verify if the Native AHCI driver is disabled? You can check if its...
View ArticleClik here to view.
Re: VCSA fails to Backup using FTPS
The blog is good up to the last step and then it is unclear I am not sure which ip address to add there? "External IP address of Firewall? This is a Windows 2012 R2 server running IIS do I use its IP...
View ArticleRe: 6.5U2 embedded linked mode strangeness
This is my 1st shot at configuring SSO so not sure what to expect. All three VCs are in same SSOdomain. Also I built all three from scratch in a test system. I am doing this as practice as we will...
View ArticleESXi 6.5 vLan issue with Xenapp MCS
I am using Xenapp MCS to build desktops in my vcenter environment. When building the desktop for users the machine is getting assigned vlan1. All xenapp stuff are on another vlan. Is it possible on...
View ArticleRe: [500]SSO error:null ,check the vsphere web client server logs for details
You have disabled NTP and enabled NTP? Can you explain where it was disabled. Also, the environment is it vcenter with embedded psc or external psc? Thanks,MS
View ArticleRe: vRA 7.4 not showing infrastrcuture tab
So, after a few re-installs i was able to figure it all the problem: licensing! Turns out i was using a vRealize Suite Standard license, which the installation wizard accepted, but in the standard...
View ArticleRe: VCSA fails to Backup using FTPS
If the folder is specified, I do not see the folder path specified which providing the FTP. In the Step 4, check the ftp info... It is specified as ftpserver/folder where the backup has to go. Eddie's...
View ArticleClik here to view.
Re: ESXi 6.5 vLan issue with Xenapp MCS
You can create new connector with this VLAN (vswitch vsphere).
View ArticleRe: ESXi 6.5 vLan issue with Xenapp MCS
Wow thanks...I have that setup and I do see Networks Vlan1 but I am not able to edit it?
View ArticleRe: Реальная частота процессора
Хорошо немного по другому.1С выполняет задачу в 1 ядро в один поток, по идеи, когда что то тяжелое идет, должно грузиться одно ядро на 3.5 герца, в бусте, а esxi размазывает всю нагрузку по всем ядрам,...
View ArticleEnabling OVF environment transport in vSphere and ESXi desktop clients.
I am looking for some information on enabling OVF environment transport in vSphere and ESXi desktop clients. I need to enable a VM to receive an OVF Environment XML descriptor at boot time. The OVF...
View ArticleRe: Can a PowerCLI script display a prompt on a Guest OS?
Here's the link to the script I downloaded:Script PowerShell GUI Restart Prompt And here's the full script I have: $vmlocation = Get-VM -Location Domain2 | sort Name foreach ($vm in $vmlocation)...
View ArticleRe: Configure Network Setting for Multiple VMs Created from a Template
I wish I knew. We have a license for it, but for some reason, the powers-that-be won't even entertain the thought of installing it. I know, I've asked a few times and the only answer I get is "We're...
View ArticleRe: vRA 7.4 not showing infrastrcuture tab
Ahh yes, the dreaded vRealize Suite Standard license. It's basically useless for vRA. Glad you found the cause and posted your own resolution!
View ArticleRe: Configure Network Setting for Multiple VMs Created from a Template
It needs to be installed. Period. There is no reason to saddle yourselves with substantially more burden and technical debt by developing complex scripts and automation when it comes built in to the...
View ArticleRe: Configure Network Setting for Multiple VMs Created from a Template
Hey, I'm on your side. I see no reason not to use a tool to make life easier, especially if we already have a license for it. Unfortunately, my boss's boss doesn't see it that way. Is there any other...
View ArticleRe: Configure Network Setting for Multiple VMs Created from a Template
Almost everything you're going to find also required vCenter. There are always other ways but, again, vCenter is almost always a prerequisite. So honestly your best bet is to tell them it can't be done...
View ArticleLocked files - VMFS 6
You probably know the error message: operation impossible since file is locked.If a VMDK is locked you can not start it inside a VM and you can not copy it. The knowledgebase basically tells you to...
View Article