RVTools is hung at Wait for search Datastores Thread
Hello, Can anyone please tell me why RVTools is stuck at 'Wait for search Datastores Thread'. Its been running for a while and not finishing.
View ArticleClik here to view.
Re: vCheck keep prompting for credential
LucD, I was thinking to close the thread here because i was feeling bad becuase even after installing it throws same error but when i tried to different vcenter it worked smoothly. It seems something...
View ArticleRe: RVTools is hung at Wait for search Datastores Thread
Have you already tried to contact the author directly at https://www.robware.net/rvtools/contact/?Some details about your environment (software version/build, storage adapters, storage type, ...) may...
View ArticleAgendar tarefas pelo terminal com CROND
Olá! Fiz o seguinte procedimento mas não esta funcionando, mas quando executo o arquivo manualmente o backup ocorre com sucesso.Peguei o tutorial que esta no link a baixo:Backup de máquina virtual...
View ArticleRe: vCheck keep prompting for credential
I have seen that message being mentioned a couple of times.Most of the times it was for a specific vCenter (as in your case).I would suggest to open a SR with VMware.And yes, PowerCLI is supported.If...
View ArticleRe: RVTools is hung at Wait for search Datastores Thread
I will try to contact them. Thank you
View ArticleComo habilitar o envio de e-mail de ESXi 6.7 pelo terminal
Olá! Não sei como fazer para habilitar o envio de e-mail pelo terminal.Para entender a minha necessidade segui o link no qual estou tentando aplicar um procedimento de backup.Backup de máquina virtual...
View ArticleGsuite with Workspace ONE Access
Does anyone have experience with using Workspace ONE Access to lock down access to corporate data through the Gsuite apps?
View ArticleProblems w/ VMware Workstation 15 Player
Hi! I recently downloaded VMware Worksation 15 Player and on it I created a VM with Kubuntu. Then I downloaded, from arduino.cc, the Arduino IDE. Now I've a problem: After writing the code and checking...
View ArticleEnviar arquivos de backup para um server FreeNAS
Olá! Seguindo esse passo a passo como faço para que o mesmo envio os arquivos de backup para um servidor FreeNASSegue o link do passo a passo: Backup de máquina virtual GRATUITO com GhettoVCB - YouTube
View ArticleClik here to view.
SRM 8.2 showing the wrong protected site in plan
I just pulled out our existing srm install after upgrading vcenter to 6.7 and did a new install of 8.2. Everything is fine except for the ip customization is backwards, it should show the protected...
View ArticleEnabling Secure Boot on existing ESXi hosts?
I am running 6.7u2 vCenter and ESXi hosts. have a HP G10 server and when I last updated the SPP(firmware) it came back and flagged secure boot not being enabled as a security problem. VMWare seemed...
View ArticleRe: Como habilitar o envio de e-mail de ESXi 6.7 pelo terminal
Boa tardeO Esxi consegue se comnuinicar com o servidor de email nessa porta?O relay do servidor de email está aberto para o ip do esxi?O esxi não tem telnet, voce pode testar com esse comando: nc -z...
View ArticleRe: Agendar tarefas pelo terminal com CROND
Recomendo dar uma olhada em: ghettoVCB.sh - Free alternative for backing up VM's for ESX(i) 3.5, 4.x & 5.x
View ArticleRe: Enviar arquivos de backup para um server FreeNAS
Dar uma olhada nesse link: ghettoVCB.sh - Free alternative for backing up VM's for ESX(i) 3.5, 4.x & 5.x Defining the NFS backup directory for VMs:NFS_VM_BACKUP_DIR=mybackups
View ArticleWorkstation 15.5.1 is damn slow on AMD EPYC 7551 32-Core Processor
Hi Guys! Recently I installed workstation 15.5.1 on windows server 2016. On the workstation I installed Cent OS with 16 GB and 2 CPUs. The entire set up is running on server AMD EPYC...
View ArticleIssues installing Update Manager server on Windows vCenter server 6.0u2
Hi,I'm using an Essentials license. Here's what I've got:(2) esxi 6.0u2 hosts(1) Windows server 2016 running vCenter server. I'm using the same ISO I used to install vCenter to try and install Update...
View ArticleRe: Como habilitar o envio de e-mail de ESXi 6.7 pelo terminal
nc -z 200.219.235.144 587Connection to 200.219.235.144 587 port [tcp/submission] succeeded!
View ArticleRe: VM created on SAS, but datastores tab shows SSD added
Thank you, folks. Apparently it was ISO but CD was not mounted, even after restarting, it was still showing. I had to remove CD in order to get rid of the datastore appearing. thank you, very much.
View ArticleDowngrade 7.0 (trial) to 6.7
Hi guys,Can I execute a downgrade from version 7.0 to 6.7 using cli, without I need reinstalling ESXI locally?I have a Vcenter license on 6.X version and need integrating this new Host. I tried command...
View Article