Hi,
Any advise would be appreciated on what could be wrong that application graphics are glitchy from time to time
↧
Re: Glitchy/unrenderred graphics on application
↧
Re: 6.7 U2: wrong WWNs
More than one year after your post and i'm facing the exact same problem. web GUI shows wrong WWN and same format as yours (looks like decimal instead of hex) but the esxcli shows the correct one.
were you able to solve the problem ?
↧
↧
Re: error during Provisioning initial publish failed:
Can I install it on Windows Server 2016 Evaluation?
↧
Re: After the deployment of nsx-t 3.0 finish and start the vm, some service is not started and cannot be accessed
Yes, I checked my 251's syslog, and there was this error prompt,.
But my 3.0's service boot unsuccessful error prompt don't know how to check
↧
Re: error during Provisioning initial publish failed:
Which component you want to install on server 2016 evaluation?
Take a look:
↧
↧
Re: 6.7 U2: wrong WWNs
I found a note in our internal bug tracker suggesting that this might actually be an issue with the way Internet Explorer manages the display of large numbers in Javascript. Does it work if you try another modern web browser – e.g. Firefox, Chrome, recent versions of Edge (based upon Chrome)?
--
Darius
↧
VMware failed
I got stuck use VMware (workstation) on HP Z820 machine.
The Microsoft Windows defender is having an influence on it.
"VMware Workstation and Device/Credential Guard are not compatible" error in VMware Workstation on Windows 10 host (2146361)
Please help.
ola
↧
Re: 6.7 U2: wrong WWNs
Thank you for the quick reply, i am using chrome to access 9 esxi hosts in my environment, 8 of them display the correct WWN and only one shows the wrong one.
↧
Re: 6.7 U2: wrong WWNs
Interesting. Just to be 100% clear, you're using the same web browser, and 8 hosts show exactly correct node and port WWNs, and one other host shows the WWN in the pseudo-decimal format... is that correct? If so, is it possible for you to share some more data, specifically the actual node/port WWNs of that 9th host, and how they are displayed in the web UI?
(Just for the record, WWNs in the web UI is totally not my area of expertise... I'm just poking around in here and trying to be helpful. )
--
Darius
↧
↧
[VMWare] Failed to start the virtual machine
Dear all,
I am currently having a problem that i couldn't start my virtual machine due to power loss. I have tried to remove all .lck files as the suggestion from other posts but doesn't work. I also attached the vmware.log.
Your help & reply would be really appricated.
Thank you !
↧
Re: Locked files - VMFS 6
Hi Ulli,
Can you explain how to extract the VM with Linux?
Best Regards,
Thiago
↧
"Install VMware Tools..." Grayed Out
I'm running VMware Workstation 15 (Version: 15.5.2 build-15785246) to host Ubuntu Linux from a Windows 10 machine. I need to share a folder between Windows and Ubuntu. I created a folder in Windows and in the Virtual Machine Settings > Options > Shared Folders it says "enabled" and my Windows folder is listed. This looked like it was going to be easy.
Following directions from a website (https://theholmesoffice.com/how-to-share-folders-between-windows-and-ubuntu-using-vmware-player/ ) I entered this command in Linux: vmware-hgfsclient, but it didn't list my shared drive.
The next step was to enter this command: sudo vmware-config-tools.pl, but this produced an error that the command wasn't found.
The assumption was that VMware Tools isn't installed. Following other web searches, in the VMware Workstation startup dialog I selected my virtual machine instance, then Player > Manage, but "Install VMware Tools..." is grayed out. This seems to confirm that VMware Tools isn't installed, but it gives me no options to do so.
I have spent hours going round-and-round the web looking for a solution. Every set of instructions from VMware says to simply select VM > Install VMware Tools when the guest OS starts (VMware Tools for Windows Guests). But I cannot find this option and it doesn't appear to apply to me.
I have downloaded VMware Tools (ISO) but I have no idea how to install it. Every guide I've found says to click on "Install VMware Tools" but all I see is "Reinstall VMware Tools" but it is grayed out. Very frustrating.
Any help would be appreciated. Thanks.
Joe
↧
Re: vSphere role
Hello Scott,
Please dont mind about my question..
i have no idea about vSphere capabilities at all. that's why i am trying to understand scope of vSphere 6.7 nothing else.
Thank you !!!
↧
↧
Re: After the deployment of nsx-t 3.0 finish and start the vm, some service is not started and cannot be accessed
fuck
One environment is
Management: VMware ESXi, 6.7.0, 15160138
Model: ProLiant DL580 G7
Processor Type: Intel (R) Xeon (R) CPU E7- 4830 - 2.13GHz
Three node vsan
install nsx-t 3.0, can not run, install 251 is no problem
For a different environment.
Management: VMware ESXi, 6.5.0, 4564106
Model: PowerEdge R720xd
Processor Type: Intel (R) Xeon (R) CPU E5-2609 0 s 2.40GHz
Single server
Installed 3.0, ready to run
It's amazing.
nsx-t 3.0 pick the cpu?
↧
Could not find a trusted signer: self signed certificate
Since I install esxi6.7 without RAID driver, I need to inject the driver into esxi6.7.iso. The problems I encounter are as follows:
PS E:\t1> $DeployNoSignatureCheck=$true
PS E:\t1> .\ESXi-Customizer-PS-v2.6.0.ps1 -v67 -vft -pkgDir E:\t1\drivers
安全警告
请只运行你信任的脚本。虽然来自 Internet 的脚本会有一定的用处，但此脚本可能会损坏你的计算机。如果你信任此脚本，请使用 Unblock-File cmdlet
允许运行该脚本，而不显示此警告消息。是否要运行 E:\t1\ESXi-Customizer-PS-v2.6.0.ps1?
[D] 不运行(D) [R] 运行一次(R) [S] 暂停(S) [?] 帮助 (默认值为“D”): r
This is ESXi-Customizer-PS Version 2.6.0 (visit https://ESXi-Customizer-PS.v-front.de for more information!)
(Call with -help for instructions)
Logging to C:\Users\Song\AppData\Local\Temp\ESXi-Customizer-PS-12712.log ...
Running with PowerShell version 5.1 and VMware PowerCLI version 12.0.0.15939655
Connecting the VMware ESXi Online depot ... [OK]
Connecting the V-Front Online depot ... [OK]
Getting Imageprofiles, please wait ... [OK]
Using Imageprofile ESXi-6.7.0-20200404001-standard ...
(dated 04/21/2020 06:45:14, AcceptanceLevel: PartnerSupported,
Updates ESXi 6.7 Image Profile-ESXi-6.7.0-20200404001-standard)
Loading Offline bundles and VIB files from E:\t1\drivers ...
Loading E:\t1\drivers\aacraid-esxi6.0-1.2.1.58012.zip ... [OK]
Add VIB scsi-aacraid 6.0.6.2.1.58012-1OEM.600.0.0.2494585 [OK, replaced 1.1.5.1-9vmw.670.0.0.8169922]
Loading E:\t1\drivers\vmware-esxi-drivers-scsi-aacraid-600.6.2.1.58012.-1.0.6.2494585.x86_64.vib ... [OK]
Add VIB scsi-aacraid 6.0.6.2.1.58012-1OEM.600.0.0.2494585 [IGNORED, already added]
Exporting the Imageprofile to 'E:\t1\ESXi-6.7.0-20200404001-standard-customized.iso'. Please be patient ...
An unexpected error occured:
Could not find a trusted signer: self signed certificate
If requesting support please be sure to include the log file
C:\Users\Song\AppData\Local\Temp\ESXi-Customizer-PS-12712.log
How to solve it?
↧
Workload management
How to resolve
Command> dcli com vmware vcenter namespacemanagement clustercompatibility list
|----------|----------|---------------------------------------------------|
|cluster |compatible|incompatibility_reasons |
|----------|----------|---------------------------------------------------|
|domain-c92|False |Cluster domain-c92 is missing compatible NSX-T VDS.|
|domain-c8 |False |Cluster domain-c8 is missing compatible NSX-T VDS. |
|----------|----------|---------------------------------------------------|
Command>
↧
Re: vSAN cluster requirement to add new nodes
Highly recommended to add same type of CPU family, Number of CPU sockets, memory size, disk size for adding new nodes in vSAN cluster for better performance.However, there is no rule to prevent for adding new nodes with higher quantity.
↧
↧
Re: Cluster CPU and Memory over subscription
↧
Re: Net.TeamPolicyUpDelay Setting Does Not Working For ESXi 6.7
Vmware has fixed this bug in latest 6.7 patch
↧
vCenter 7 Remote Access
Hey All, hoping one of you has run into a similar issue as this.
I've recently built a home lab and I've been intending to base it on VMware with remote access via vCenter. Built it all and its working perfect from internal to my network however when I try to access it from the internet I get no response after opening the link to the vSphere web client.
I'm using DDNS which is the exact FQDN of my vCenter server and forwarding the external port through 443 on my router. When the FQDN was not the same (internal and external) I was getting the error:
"[400] An error occurred while sending an authentication request to the vCenter Single Sign-On server - An error occurred when processing metadata during vCenter Single Sign-On setup: the service provider validation failed. Verify that the server URL is correct and is in FQDN format, or that the hostname is a trusted service provider alias."
When the FQDN matched internal and external I am getting a page timeout after clicking the HTML5 web client link.
I'm assuming that I'm getting to the server just fine with my DDNS as I hit the landing page but I'm not sure what happens after that unfortunately. Anyone have an idea? I've been at this for ages XD
↧